Curtain Shield Airbag Assembly (for Access Cab)

SUPPLEMENTAL RESTRAINT SYSTEM: CURTAIN SHIELD AIRBAG ASSEMBLY (for Access Cab): ON-VEHICLE INSPECTION

ON-VEHICLE INSPECTION

1. INSPECT CURTAIN SHIELD AIRBAG ASSEMBLY (for Vehicle not Involved in Collision)
(a) Perform a Diagnostic System Check DTC Check / Clear.





(b) With the curtain shield airbag installed on the vehicle, perform a visual check. If any of the defects mentioned below are present, replace the curtain shield airbag with a new one:
Cuts, small cracks or marked discoloration on the curtain shield airbag.

2. INSPECT CURTAIN SHIELD AIRBAG ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)
(a) Perform a Diagnostic System Check DTC Check / Clear.





(b) With the curtain shield airbag removed from the vehicle, perform a visual check. If there are any defects as mentioned below, replace the curtain shield airbag with a new one:
- Cuts, small cracks or marked discoloration on the curtain shield airbag.
- Cracks or other damage to the connectors.
CAUTION: For removal and installation of the curtain shield airbag, be sure to follow the correct procedure.