Installation

R155 MANUAL TRANSMISSION: MANUAL TRANSMISSION EXTENSION HOUSING OIL SEAL: INSTALLATION

INSTALLATION





1. INSTALL MANUAL TRANSMISSION EXTENSION HOUSING OIL SEAL
(a) Using SST and a hammer, tap in the new oil seal to the extension housing.
SST: 09223-00010
Drive in depth:
-0.5 to 0.5 mm (-0.020 to 0.020 in.)
NOTICE: Be careful not to damage the oil seal rip

(b) Coat the lip of a new oil seal with MP grease.
2. INSTALL PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY (for Access Cab) Installation
3. INSTALL PROPELLER SHAFT ASSEMBLY (for Regular Cab) Installation
4. CHECK FOR MANUAL TRANSMISSION OIL LEAKAGE