Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2009 >> Tacoma PreRunner L4-2.7L (2TR-FE) >> Repair and Diagnosis >> Windows and Glass >> Windows >> Testing and Inspection >> Symptom Related Diagnostic Procedures >> Remote Up / Down Function Does Not Operate
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Remote Up / Down Function Does Not Operate








WINDSHIELD / WINDOWGLASS: POWER WINDOW CONTROL SYSTEM: Remote Up / Down Function does not Operate

Remote Up / Down Function does not Operate

DESCRIPTION
With the ignition switch ON, the power window regulator master switch assembly transmits remote switch signals to the passenger side power window and rear door power window regulator switches. Then, the regulator switches drive the power window regulator motors.

WIRING DIAGRAM









INSPECTION PROCEDURE

PROCEDURE

1. CHECK POWER WINDOW LOCK SWITCH




(a) Turn the window lock switch OFF and operate the master switches assembly passenger side and rear door side switches. Check that the remote UP/DOWN function operates normally.
OK:
Remote UP/DOWN function operates normally.
OK -- END
NG -- Continue to next step.

2. CHECK MANUAL UP/DOWN FUNCTION
(a) Check that the passenger side and rear door side power window manual UP/DOWN functions operate normally.
OK:
Manual UP/DOWN function operates normally.
NG -- OTHER PROBLEM
OK -- Continue to next step.

3. INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY




(a) Double cab: Inspect the power window regulator master switch assembly.
(1) Remove the power window regulator master switch assembly.
(2) Disconnect the P9 power window regulator master switch connector.
(3) Measure the resistance between the terminals of the connector when the switch is operated.
Standard (Passenger switch):






Standard (Rear LH switch):






Standard (Rear RH switch):






(4) Reconnect the power window regulator master switch connector.
(5) Reinstall the power window regulator master switch assembly.




(b) Access cab: Inspect the power window regulator master switch assembly.
(1) Remove the power window regulator master switch assembly.
(2) Disconnect the P9 power window regulator master switch connector.
(3) Measure the resistance between the terminals of the connector when the switch is operated.
Standard (Passenger switch):






(4) Reconnect the power window regulator master switch connector.
(5) Reinstall the power window regulator master switch assembly.
NG -- REPLACE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY
OK -- REPAIR OR REPLACE HARNESS OR CONNECTOR (WINDOW REGULATOR MASTER SWITCH - EACH REGULATOR SWITCH)
pro multis · About Operation CHARM