Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2009 >> Tundra 2WD V6-4.0L (1GR-FE) >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Crankshaft Position Sensor >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation








1GR-FE ENGINE CONTROL SYSTEM: CRANKSHAFT POSITION SENSOR: INSTALLATION

INSTALLATION

1. INSTALL CRANKSHAFT POSITION SENSOR
(a) Apply a light coat of engine oil to the O-ring of the sensor.





(b) Install the sensor with the bolt.
Torque: 10 Nm (102 kgf-cm, 7 ft-lbf)
(c) Connect the sensor connector.
2. CONNECT COOLER COMPRESSOR ASSEMBLY Installation
3. INSTALL GENERATOR ASSEMBLY Installation
4. INSTALL FAN AND GENERATOR V BELT Installation
5. INSTALL NO. 1 ENGINE UNDER COVER Installation
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: Some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.
pro multis · About Operation CHARM