Removal

CRUISE CONTROL: CRUISE CONTROL MAIN SWITCH: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
NOTE: Some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.
NOTE: After the ignition switch is turned OFF, the navigation system requires approximately 90 seconds to record various types of memory and settings. As a result, after turning the ignition switch OFF, wait 90 seconds or more before disconnecting the cable from the negative (-) battery terminal.

2. REMOVE LOWER NO. 2 STEERING WHEEL COVER Removal
3. REMOVE LOWER NO. 3 STEERING WHEEL COVER Removal
4. REMOVE STEERING PAD (w/o Steering Pad Switch) Removal
5. REMOVE STEERING PAD (w/ Steering Pad Switch) Removal
6. REMOVE CRUISE CONTROL MAIN SWITCH

(a) Disconnect the connector.
(b) Remove the 2 screws.