Removal

2UZ-FE IGNITION: IGNITION COIL AND SPARK PLUG: REMOVAL

REMOVAL

1. REMOVE THROTTLE BODY COVER ASSEMBLY Removal
2. REMOVE AIR CLEANER HOSE ASSEMBLY Removal
3. REMOVE FRONT FENDER APRON SEAL REAR LH Removal
4. REMOVE NO. 2 AIR HOSE Removal
5. REMOVE NO. 3 AIR TUBE Removal
6. REMOVE AIR SWITCHING VALVE ASSEMBLY (for Bank 1) Removal
7. REMOVE FRONT FENDER APRON SEAL REAR RH Removal
8. DISCONNECT NO. 1 WATER BY-PASS PIPE Removal
9. DISCONNECT NO. 2 AIR INJECTION SYSTEM HOSE
10. REMOVE NO. 2 AIR TUBE Removal
11. REMOVE AIR SWITCHING VALVE ASSEMBLY (for Bank 2) Removal
12. REMOVE IGNITION COIL ASSEMBLY





(a) Disconnect the 8 ignition coil connectors.
(b) Remove the 8 bolts and pull out the 8 ignition coils.
13. REMOVE SPARK PLUG
(a) Using a 16 mm plug wrench, remove the 8 spark plugs.