Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2009 >> Venza AWD L4-2.7L (1AR-FE) >> Repair and Diagnosis >> Accessories and Optional Equipment >> Antitheft and Alarm Systems >> Alarm Module >> Service and Repair >> Certification ECU >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation








THEFT DETERRENT / KEYLESS ENTRY: CERTIFICATION ECU: INSTALLATION

INSTALLATION

1. INSTALL CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)





(a) Install the certification ECU (smart key ECU assembly) with the 2 nuts.





(b) Connect each connector.
2. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY Installation
3. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation
4. INSTALL COWL SIDE TRIM SUB-ASSEMBLY
HINT: Use the same procedure for the RH side and LH side Installation.

5. INSTALL FRONT DOOR SCUFF PLATE
HINT: Use the same procedure for the RH side and LH side Installation.

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

7. REGISTER KEY
NOTICE: When replacing the certification ECU (smart key ECU assembly), perform initialization Engine Immobiliser System (W/ Smart Key System).

8. REGISTER ECU COMMUNICATION ID
NOTICE: When replacing the certification ECU (smart key ECU assembly), perform initialization Engine Immobiliser System (W/ Smart Key System).
pro multis · About Operation CHARM