Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2009 >> Venza AWD L4-2.7L (1AR-FE) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Crankshaft Position Sensor >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation








1AR-FE ENGINE CONTROL: CRANKSHAFT POSITION SENSOR: INSTALLATION

INSTALLATION

1. INSTALL CRANKSHAFT POSITION SENSOR
(a) Apply a light coat of engine oil to the O-ring of the sensor.
NOTICE: Make sure that the O-ring is not cracked or does not jump out of position during installation.





(b) Apply adhesive to 2 or 3 threads of the bolt.

Text in Illustration





Adhesive:
Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent.





(c) Install the sensor with the bolt.
Torque: 10 Nm (102 kgf-cm, 7ft-lbf)
(d) Connect the sensor connector.
2. INSPECT FOR OIL LEAK
3. INSTALL FRONT FENDER APRON SEAL RH Installation
pro multis · About Operation CHARM