Maintenance Indicator Reset

After changing the engine oil

The Engine oil maintenance data should be reset. Perform the following procedures:

1. Switch the display to the trip meter A when the engine is running.

2. Vehicles without a smart key system
Turn the engine switch off.

Vehicles with a smart key system
Turn the "ENGINE START STOP" switch off.

3. Vehicles without a smart key system
While pressing the trip meter reset button, turn the engine switch to the "ON" position (do not start the engine because reset mode will be cancelled). Continue to press and hold the button until the trip meter displays "000000".

Vehicles with a smart key system
While pressing the trip meter reset button, turn the "ENGINE START STOP" switch to the IGNITION ON mode (do not start the engine because the reset mode will be cancelled). Continue to press and hold the button until the trip meter displays "000000".