Removal

SUPPLEMENTAL RESTRAINT SYSTEMS: REAR FLOOR AIRBAG SENSOR: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE REAR NO. 1 SEAT ASSEMBLY

(a) for 60/40 Split Double-folding Seat Type LH Side

(1) Remove the rear No. 1 seat assembly Removal.

(b) for 60/40 Split Double-folding Seat Type RH Side

(1) Remove the rear No. 1 seat assembly Removal.

(c) for 60/40 Split Slide Walk-in Seat Type LH Side

(1) Remove the rear No. 1 seat assembly Removal.

(d) for 60/40 Split Slide Walk-in Seat Type RH Side

(1) Remove the rear No. 1 seat assembly Removal.

3. REMOVE REAR NO. 1 FLOOR STEP COVER (w/ Rear No. 2 Seat) Removal

4. REMOVE QUARTER SCUFF PLATE LH (w/ Rear No. 2 Seat) Removal

5. REMOVE QUARTER SCUFF PLATE RH (w/ Rear No. 2 Seat) Removal

6. REMOVE REAR DOOR SCUFF PLATE LH Removal

7. REMOVE REAR DOOR SCUFF PLATE RH Removal

8. REMOVE REAR FLOOR SIDE AIRBAG SENSOR COVER

(a) Fold back the floor carpet.

(b) Detach the clip and claw, and remove the cover.





9. REMOVE REAR FLOOR SIDE AIRBAG SENSOR

(a) Remove the bolt and sensor.





(b) Disconnect the connector.