How To Proceed With Troubleshooting

SUSPENSION CONTROL: KINETIC DYNAMIC SUSPENSION SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING

HINT
*: Use the Techstream.

1. VEHICLE BROUGHT TO WORKSHOP

NEXT -- Continue to next step.

2. CUSTOMER PROBLEM ANALYSIS

NEXT -- Continue to next step.

3. INSPECT BATTERY VOLTAGE

Standard voltage:

11 to 14 V

If the voltage is below 11 V, recharge or replace the battery before proceeding.

NEXT -- Continue to next step.

4. INSPECT COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*

(a) Inspect the CAN communication function to make sure there are no malfunctions in the communication system Diagnosis System.





B -- GO TO CAN COMMUNICATION SYSTEM
A -- Continue to next step.

5. CHECK AND CLEAR DTC

(a) Check for DTCs Reading and Clearing Diagnostic Trouble Codes.

NEXT -- Continue to next step.

6. PROBLEM SYMPTOM CONFIRMATION





B -- Go to step 9
A -- Continue to next step.

7. SYMPTOM SIMULATION

NEXT -- Continue to next step.

8. CHECK DTC*

(a) Check for DTCs Reading and Clearing Diagnostic Trouble Codes.





B -- Go to step 10
A -- Continue to next step.

9. PROBLEM SYMPTOMS TABLE

(a) Refer to the Problem Symptoms Table Kinetic Dynamic Suspension System.

NEXT -- Go to step 12

10. DTC CHART

(a) Refer to the Diagnostic Trouble Code Chart Kinetic Dynamic Suspension System.

NEXT -- Continue to next step.

11. CIRCUIT INSPECTION

NEXT -- Continue to next step.

12. IDENTIFICATION OF PROBLEM

NEXT -- Continue to next step.

13. REPAIR OR REPLACE

NEXT -- Continue to next step.

14. CONFIRMATION TEST

NEXT -- END