Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2010 >> 4 Runner 4WD V6-4.0L (1GR-FE) >> Repair and Diagnosis >> Powertrain Management >> Relays and Modules - Powertrain Management >> Relays and Modules - Computers and Control Systems >> Main Relay (Computer/Fuel System) >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Main Relay (Computer/Fuel System): Testing and Inspection





1GR-FE ENGINE CONTROL: RELAY: ON-VEHICLE INSPECTION

1. INSPECT CIRCUIT OPENING RELAY (C/OPN)

(a) Measure the resistance according to the value(s) in the table below.





Standard Resistance:





(b) If the result is not as specified, replace the circuit opening relay.

2. INSPECT NO. 1 INTEGRATION RELAY (IG2)

(a) Check the IG2 fuse.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





(2) If the result is not as specified, replace the IG2 fuse.

(b) Check the IG2 relay.

(1) Measure the resistance according to the value(s) in the table below.





Standard Resistance:









(2) If the result is not as specified, replace the No. 1 integration relay.

3. INSPECT NO. 1 INTEGRATION RELAY (EFI)

(a) Check the EFI fuse.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





(2) If the result is not as specified, replace the EFI fuse.

(b) Check the EFI relay.

(1) Measure the resistance according to the value(s) in the table below.





Standard Resistance:









(2) If the result is not as specified, replace the No. 1 integration relay.

4. INSPECT NO. 1 INTEGRATION RELAY (A/F)

(a) Check the A/F fuse.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





(2) If the result is not as specified, replace the A/F fuse.

(b) Measure the resistance according to the value(s) in the table below.





Standard Resistance:









(c) If the result is not as specified, replace the No. 1 integration relay.

5. INSPECT MAIN BODY ECU (DRIVER SIDE JUNCTION BLOCK)

NOTICE:
The ACC relay and IG1 No. 1 relay are built into the main body ECU (driver side junction block).

(a) Inspect the ACC relay.

(1) Measure the resistance according to the value(s) in the table below.









Standard Resistance:





(2) If the result is not as specified, replace the main body ECU.

(b) Inspect the IG1 No. 1 relay.

(1) Measure the resistance according to the value(s) in the table below.









Standard Resistance:





(2) If the result is not as specified, replace the main body ECU.
pro multis · About Operation CHARM