Removal

CRUISE CONTROL: CLUTCH SWITCH: REMOVAL

1. REMOVE FRONT DOOR SCUFF PLATE LH Removal

2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH Removal

3. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER LH (for TMC Made) Removal

4. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER LH (for TMMK Made) Removal

5. REMOVE MAIN BODY ECU (COWL SIDE JUNCTION BLOCK LH)

(a) Disconnect all connectors.

(b) Remove the 2 nuts and the main body ECU (cowl side junction block LH).





6. REMOVE CLUTCH SWITCH ASSEMBLY

(a) Disconnect the connector.

(b) Loosen the nut and remove the clutch switch assembly.