Removal

SUPPLEMENTAL RESTRAINT SYSTEM: SEAT POSITION SENSOR: REMOVAL

1. PRECAUTION

CAUTION:
Be sure to read "PRECAUTION" thoroughly before servicing Service Precautions.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (for Manual Seat)

NOTICE:
Wait for 90 seconds after disconnecting the cable to prevent airbag deployment.

3. REMOVE FRONT SEAT HEADREST ASSEMBLY (for Manual Seat)

4. REMOVE FRONT SEAT HEADREST ASSEMBLY (for Power Seat)

5. REMOVE SEAT TRACK COVER LH (for Manual Seat) Removal

6. REMOVE SEAT TRACK COVER LH (for Power Seat) Removal

7. REMOVE INNER SEAT TRACK BRACKET COVER LH (for Manual Seat) Removal

8. REMOVE SEAT TRACK COVER RH (for Power Seat) Removal

9. REMOVE FRONT SEAT ASSEMBLY LH (for Manual Seat) Removal

10. REMOVE FRONT SEAT ASSEMBLY LH (for Power Seat) Removal

11. REMOVE VERTICAL ADJUSTER COVER (for Manual Seat) Disassembly

12. REMOVE VERTICAL ADJUSTING HANDLE (for Manual Seat) Disassembly

13. REMOVE RECLINING ADJUSTER RELEASE HANDLE (for Manual Seat) Disassembly

14. REMOVE FRONT SEAT CUSHION SHIELD (for Manual Seat) Disassembly

15. REMOVE SEAT POSITION SENSOR (for Manual Seat)

(a) Disconnect the connector.





(b) Using a "torx" socket wrench (T30), remove the "torx" screw and seat position sensor with the seat slide position sensor protector.

(c) Remove the seat position sensor from the seat slide position sensor protector as shown in the illustration.





16. REMOVE SEAT POSITION SENSOR (for Power Seat)

(a) Disconnect the connector.





(b) Using a "torx" socket wrench (T30), separate the "torx" screw and seat position sensor with the seat slide position sensor protector.

(c) Remove the seat position sensor from the seat slide position sensor protector as shown in the illustration.