Installation

LIGHTING: AUTOMATIC LIGHT CONTROL SENSOR: INSTALLATION

1. INSTALL AUTOMATIC LIGHT CONTROL SENSOR

(a) Engage the 2 claws and install the automatic light control sensor.





(b) Connect the connector.

2. INSTALL DEFROSTER NOZZLE ASSEMBLY Reassembly

3. INSTALL SIDE NO. 2 DEFROSTER NOZZLE DUCT Reassembly

4. INSTALL SIDE NO. 1 DEFROSTER NOZZLE DUCT Reassembly

5. INSTALL NO. 4 HEATER TO REGISTER DUCT Reassembly

6. INSTALL NO. 1 HEATER TO REGISTER DUCT Reassembly

7. INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY (for Pole Antenna Type) Installation

8. INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY (for Glass Antenna Type) Installation

9. CONNECT INSTRUMENT PANEL WIRE ASSEMBLY Installation

10. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY (for LH Side) Installation

11. INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY Installation

12. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY (for RH Side) Installation

13. INSTALL NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY Installation

14. INSTALL FRONT PILLAR GARNISH RH Installation

15. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH Installation

16. INSTALL FRONT PILLAR GARNISH LH Installation

17. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH Installation

18. INSTALL ENGINE SWITCH (w/ Smart Key System) Installation

19. INSTALL FRONT NO. 2 CONSOLE BOX INSERT Installation

20. INSTALL FRONT NO. 1 CONSOLE BOX INSERT Installation

21. INSTALL CONSOLE BOX ASSEMBLY (w/o Rear Air Conditioning System) Installation

22. INSTALL CONSOLE BOX ASSEMBLY (w/ Rear Air Conditioning System) Installation

23. INSTALL LOWER REAR CONSOLE BOX Installation

24. INSTALL NO. 2 CONSOLE BOX DUCT (w/o Rear Air Conditioning System) Installation

25. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY Installation

26. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (for Manual Air Conditioning System) Installation

27. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (for Automatic Air Conditioning System) Installation

28. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH Installation

29. INSTALL FRONT DOOR SCUFF PLATE LH Installation

30. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY Installation

31. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

32. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH Installation

33. INSTALL FRONT DOOR SCUFF PLATE RH Installation

34. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (w/o Navigation System) Installation

35. INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKET (w/ Navigation System) Installation

36. INSTALL HEATER CONTROL AND ACCESSORY ASSEMBLY (for Manual Air Conditioning System) Installation

37. INSTALL AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System) Installation

38. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (w/o Smart Key System) Installation

39. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (w/ Smart Key System) Installation

40. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY Installation

41. INSTALL COMBINATION METER ASSEMBLY Installation

42. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY Installation

43. POSITION FRONT WHEELS STRAIGHT AHEAD

44. INSTALL TURN SIGNAL SWITCH ASSEMBLY WITH SPIRAL CABLE SUB-ASSEMBLY Installation

45. INSTALL STEERING COLUMN COVER Installation

46. ADJUST SPIRAL CABLE SUB-ASSEMBLY Installation

47. INSTALL STEERING WHEEL ASSEMBLY Installation

48. INSPECT STEERING WHEEL CENTER POINT

49. INSTALL STEERING PAD Installation

50. INSTALL LOWER NO. 2 STEERING WHEEL COVER Installation

51. INSTALL LOWER NO. 3 STEERING WHEEL COVER Installation

52. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization

53. INSPECT STEERING PAD Installation

54. INSPECT SRS WARNING LIGHT

(a) Inspect the SRS warning light Diagnosis System.