Removal

Q211 HYBRID TRANSMISSION / TRANSAXLE: DUST COVER: REMOVAL

1. DRAIN HYBRID TRANSAXLE FLUID Q211 Hybrid Transaxle

2. REMOVE REAR WHEEL

3. REMOVE EXHAUST PIPE ASSEMBLY (for RH Side)

Removal

4. REMOVE REAR AXLE SHAFT NUT Removal

5. SEPARATE REAR STRUT ROD ASSEMBLY Removal

6. SEPARATE REAR NO. 1 SUSPENSION ARM ASSEMBLY Removal

7. SEPARATE REAR NO. 2 SUSPENSION ARM ASSEMBLY Removal

8. REMOVE REAR DRIVE SHAFT ASSEMBLY Removal

9. REMOVE DIFFERENTIAL SIDE GEAR SHAFT SUB-ASSEMBLY Removal

10. REMOVE DUST COVER

(a) Clamp the side gear shaft in a vise.





NOTICE:
Do not damage the side gear shaft.

(b) Using a screwdriver and a hammer, remove the dust cover.