Installation

2GR-FE ENGINE CONTROL SYSTEM: ENGINE COOLANT TEMPERATURE SENSOR: INSTALLATION

1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR

(a) Install a new gasket onto the engine coolant temperature sensor.

(b) Install the engine coolant temperature sensor.





Torque : 20 Nm (204 kgf-cm, 15 ft-lbf)

(c) Connect the engine coolant temperature sensor connector.

2. INSTALL AIR CLEANER CASE SUB-ASSEMBLY

3. INSTALL AIR CLEANER CAP SUB-ASSEMBLY

4. INSTALL NO. 1 AIR CLEANER INLET

5. INSTALL NO. 2 AIR CLEANER INLET

6. INSTALL BATTERY

7. INSTALL COOL AIR INTAKE DUCT SEAL

8. ADD ENGINE COOLANT

9. INSPECT FOR COOLANT LEAK

10. INSTALL NO. 1 ENGINE UNDER COVER

11. INSTALL ENGINE UNDER COVER ASSEMBLY

12. INSTALL V-BANK COVER SUB-ASSEMBLY