Clearance Warning Buzzer Circuit

PARK ASSIST / MONITORING: INTUITIVE PARKING ASSIST SYSTEM: Clearance Warning Buzzer Circuit
- Clearance Warning Buzzer Circuit

DESCRIPTION

The No. 1 clearance warning buzzer sounds to alert the driver and the buzzed frequency changes depending on the distance to an obstacle.

WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. PERFORM ACTIVE TEST USING TECHSTREAM (NO. 1 CLEARANCE WARNING BUZZER)

(a) Select the Active Test, use the Techstream to generate a control command, and then check that the buzzer operates.

Intuitive P/A





OK:

No. 1 clearance warning buzzer sounds.

NG -- CHECK HARNESS AND CONNECTOR (CLEARANCE WARNING ECU - NO. 1 CLEARANCE WARNING BUZZER)

OK -- PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE Intuitive Parking Assist System

2. CHECK HARNESS AND CONNECTOR (CLEARANCE WARNING ECU - NO. 1 CLEARANCE WARNING BUZZER)





(a) Disconnect the F12 ECU connector.

(b) Disconnect the E10 buzzer connector.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR

OK -- REPLACE NO. 1 CLEARANCE WARNING BUZZER Removal