Rear View Monitor System

PARK ASSIST / MONITORING: REAR VIEW MONITOR SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING

HINT
Use the procedures to troubleshoot the rear view monitor system.

1. VEHICLE BROUGHT TO WORKSHOP

NEXT -- Continue to next step.

2. CUSTOMER PROBLEM ANALYSIS

NEXT -- Continue to next step.

3. CHECK DTC OF NAVIGATION SYSTEM

(a) Refer to the DTC Check / Clear procedures of the navigation system Reading and Clearing Diagnostic Trouble Codes.





B -- Go to NAVIGATION SYSTEM Reading and Clearing Diagnostic Trouble Codes
A -- Continue to next step.

4. PROBLEM SYMPTOM CONFIRMATION





B -- Go to step 6
A -- Continue to next step.

5. SYMPTOM SIMULATION

NEXT -- Continue to next step.

6. CHECK IF SAME SYMPTOM APPEARS IN NAVIGATION SYSTEM

(a) Refer to the navigation system.





B -- Go to NAVIGATION SYSTEM Problem Symptoms Table
A -- Continue to next step.

7. PROBLEM SYMPTOMS TABLE

(a) Refer to the Problem Symptoms Table Rear View Monitor System.





B -- Go to step 9
A -- Continue to next step.

8. BASED ON MALFUNCTION SYMPTOM, PERFORM TROUBLESHOOTING BELOW

(a) Terminals of ECU Rear View Monitor System.

NEXT -- Continue to next step.

9. ADJUST, REPAIR OR REPLACE

NEXT -- Continue to next step.

10. CONFIRMATION TEST

NEXT -- END