Installation

AUDIO / VIDEO: MULTI-MEDIA INTERFACE ECU: INSTALLATION

HINT
A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.

1. INSTALL NO. 1 MULTI-MEDIA INTERFACE BRACKET

(a) Install the bracket with the 2 bolts.

2. INSTALL NO. 2 MULTI-MEDIA INTERFACE BRACKET

(a) Install the bracket with the 2 bolts.

3. INSTALL MULTI-MEDIA INTERFACE ECU

(a) Install the multi-media interface ECU with the 2 bolts.

(b) Connect the connectors.

4. INSTALL FRONT FLOOR CARPET ASSEMBLY

(a) Install the carpet that was pulled back to remove the selector. For further details, refer to the installation procedure Installation.

5. INSTALL FRONT DOOR SCUFF PLATE RH Installation

6. INSTALL COWL SIDE TRIM BOARD RH Installation

7. INSTALL INSTRUMENT SIDE PANEL RH Installation

8. INSTALL FRONT SEAT ASSEMBLY RH

(a) Install the front seat assembly RH Installation.

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

10. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light Diagnosis System.