Installation

EXTERIOR PANELS / TRIM: REAR BUMPER: INSTALLATION

HINT
A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.

1. INSTALL NO. 2 LUGGAGE COMPARTMENT SIDE COVER PROTECTOR





(a) Install the protector with 2 new grommets.

(b) Install the 2 screws.

2. INSTALL NO. 1 LUGGAGE COMPARTMENT SIDE COVER PROTECTOR

HINT
Use the same procedures described for the LH side.

3. INSTALL REAR BUMPER ARM BRACKET LH





(a) Install the bumper arm bracket with the 2 bolts.

(b) Connect the connector.

4. INSTALL REAR BUMPER ARM BRACKET





HINT
Use the same procedure to install the bumper arm bracket on the other side.

(a) Install the bumper arm bracket with the bolt.

5. INSTALL REAR NO. 2 BUMPER REINFORCEMENT





(a) Install the bumper reinforcement with the 2 bolts.

6. INSTALL REAR BUMPER SIDE SUPPORT LH





(a) Attach the 6 claws to install the bumper side support.

(b) Install the 3 screws.

7. INSTALL REAR BUMPER SIDE SUPPORT RH

HINT
Use the same procedures described for the LH side.

8. INSTALL UPPER REAR BUMPER RETAINER LH





(a) Attach the 2 clips to install the bumper retainer.

9. INSTALL UPPER REAR BUMPER RETAINER RH

HINT
Use the same procedures described for the LH side.

10. INSTALL REAR COMBINATION LIGHT ASSEMBLY LH Installation

11. INSTALL REAR COMBINATION LIGHT ASSEMBLY RH

HINT
Use the same procedures described for the LH side.

12. INSTALL REAR BUMPER COVER

(a) w/ Intuitive Parking Assist System:

Connect the No. 2 frame wire connector.

(b) Attach the 14 claws to install the bumper cover.

(c) Install the 7 bolts, 6 screws and 2 clips.





(d) Open the tail gate and install the 4 clips.





(e) Close the tail gate.

13. INSTALL REAR NO. 1 BUMPER PLATE

(a) Attach the 20 claws to install the bumper plate.





14. INSTALL REAR QUARTER PANEL MUDGUARD LH Installation

15. INSTALL REAR QUARTER PANEL MUDGUARD RH Installation