Procedures

DOOR / HATCH: BACK DOOR SUPPORT: DISPOSAL

1. DISPOSE OF BACK DOOR STAY ASSEMBLY LH

(a) Horizontally fix the stay in a vise with the piston-rod pulled out.





(b) Using a metal saw, gradually cut any area between A and B to release the gas.

Standard:





CAUTION:
As metal debris may be blown outward by the gas, you must:

* Wear protective glasses.
* Cover the area being cut.
NOTICE:
The gas inside the hood support is colorless, odorless and harmless. As there is a possibility that metal debris could scatter, cover the back door stay with a piece of cloth or other material.