Installation

DOOR LOCK: DOOR CONTROL RECEIVER: INSTALLATION

HINT
A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.

1. INSTALL DOOR CONTROL RECEIVER

(a) Install the receiver with the bolt.





Torque : 15 Nm (153 kgf-cm, 11 ft-lbf)

(b) Connect the connector.

2. INSTALL REAR UPPER PILLAR GARNISH RH Installation

3. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH Installation

4. INSTALL REAR SEAT COVER CAP Installation

5. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK Installation

6. INSTALL REAR FLOOR MAT REAR SUPPORT PLATE Installation

7. INSTALL REAR DOOR SCUFF PLATE RH Installation

8. INSTALL REAR STEP COVER Installation

9. INSTALL REAR NO. 2 SEAT ASSEMBLY RH

(a) Install the rear No. 2 seat assembly RH Installation.