Reassembly

INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REASSEMBLY

HINT
A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.

1. INSTALL NO. 2 INSTRUMENT PANEL WIRE

(a) Attach the wire to the clamps to install the wire to the instrument panel.





2. INSTALL ANTENNA CORD SUB-ASSEMBLY (w/o Multi-display) Installation

3. INSTALL ANTENNA CORD SUB-ASSEMBLY (w/ Multi-display) Installation

4. INSTALL NAVIGATION ANTENNA ASSEMBLY (w/ Multi-display) Installation

5. INSTALL NO. 2 SIDE DEFROSTER NOZZLE

(a) Attach the 3 claws to install the nozzle.





6. INSTALL NO. 1 SIDE DEFROSTER NOZZLE

(a) Attach the 2 claws to install the nozzle.





7. INSTALL DEFROSTER NOZZLE ASSEMBLY

(a) Attach the 11 claws to install the nozzle.





8. INSTALL FRONT PASSENGER SIDE AIRBAG ASSEMBLY Installation

9. INSTALL REAR NO. 1 AIR DUCT

(a) Install the duct with the 2 screws.





10. INSTALL CENTER HEATER TO REGISTER DUCT

(a) Install the duct with the 3 screws.