Removal

3UR-FE LUBRICATION: OIL LEVEL SENSOR: REMOVAL

1. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH Removal

2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH Removal

3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY Removal

4. REMOVE NO. 2 ENGINE UNDER COVER Removal

5. DRAIN ENGINE OIL Replacement

6. DISCONNECT OIL COOLER PIPE ASSEMBLY





(a) Remove the 2 bolts and disconnect the oil cooler pipe.

7. REMOVE ENGINE OIL LEVEL SENSOR

(a) Disconnect the oil level sensor connector.





(b) Remove the 4 bolts and oil level sensor.





(c) Cut off the gasket as shown in the illustration.

(d) Remove the gasket from the oil level sensor.

HINT
After cutting away the parts of the gasket shown in the illustration, remove only the outer part of the gasket.