Installation

JF2A TRANSFER / 4WD / AWD: 4WD CONTROL ECU: INSTALLATION

1. INSTALL 4WD CONTROL ECU

(a) Install the ECU with the bolt.

Torque : 13 Nm (127 kgf-cm, 9 ft-lbf)





(b) Connect the 2 ECU connectors.

2. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL Installation

3. INSTALL INSTRUMENT PANEL BOX DOOR KNOB Installation

4. INSTALL NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH Installation

5. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY Installation

6. INSTALL COWL SIDE TRIM BOARD RH Installation

7. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

8. INSTALL FRONT DOOR SCUFF PLATE RH Installation

9. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH Installation

10. INSTALL NO. 1 INSTRUMENT PANEL FINISH CUSHION Installation