Removal

JF2A TRANSFER / 4WD / AWD: 4WD CONTROL ECU: REMOVAL

1. REMOVE NO. 1 INSTRUMENT PANEL FINISH CUSHION Removal

2. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH Removal

3. REMOVE FRONT DOOR SCUFF PLATE RH Removal

4. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal

5. REMOVE COWL SIDE TRIM BOARD RH Removal

6. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY Removal

7. REMOVE NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH Removal

8. REMOVE INSTRUMENT PANEL BOX DOOR KNOB Removal

9. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL Removal

10. REMOVE 4WD CONTROL ECU

(a) Disconnect the 2 ECU connectors.





(b) Remove the bolt and ECU.