B2027

PRE-COLLISION: PRE-COLLISION SYSTEM: B2015,B2016,B2020,B2021,B2025-B2027,B2030-B2032,B2035,B2040,B2041,B2043,B2047: Open in Right Side Upper MOS


DESCRIPTION

The DTCs above are stored during seat belt control ECU self diagnosis.

HINT
- When DTC B2015 or B2016 is detected, DTCs B2026 and B2027 will not be detected.
- When DTC B2020 or B2021 is detected, DTCs B2031 and B2032 will not be detected.





INSPECTION PROCEDURE

PROCEDURE

1. CHECK DTC OUTPUT

(a) Using the Techstream, enter the following menus: Body Electrical / Pre-Collision / Trouble Codes.

(b) Clear the DTCs Pre-Collision System.

(c) Turn the power switch off.

(d) Turn the power switch on (IG).

(e) Recheck for DTCs.

OK:

DTCs are not output.

NG -- REPLACE SEAT BELT CONTROL ECU Removal

OK -- CHECK FOR INTERMITTENT PROBLEMS (SYMPTOM SIMULATION) How To Proceed With Troubleshooting