Rear View Monitor System (w/ Navigation System)

PARK ASSIST / MONITORING: REAR VIEW MONITOR SYSTEM (w/ Navigation System): TERMINALS OF ECU

1. REAR TELEVISION CAMERA ASSEMBLY





(a) Disconnect the V6 connector from the rear television camera assembly.

(b) Measure the voltage of each terminal of the wire harness side connector.





(c) If the result is not as specified, there may be a malfunction on the wire harness side.

(d) Reconnect the V6 connector to the rear television camera assembly.

(e) Check for pulses between each terminal of the connector.





(f) If the result is not as specified, the camera may have a malfunction.

(g) Reference (Oscilloscope waveform):





(1) Waveform 1 (under normal conditions)





HINT
The video waveform changes according to the image sent by the rear television camera assembly.

(2) Waveform 2 (camera lens is covered, blacking out the screen)





HINT
The video waveform changes according to the image sent by the rear television camera assembly.





2. NAVIGATION RECEIVER ASSEMBLY Pinout Values and Diagnostic Parameters