Navigation Receiver Assembly Power Source Circuit

NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: Navigation Receiver Assembly Power Source Circuit
- Navigation Receiver Assembly Power Source Circuit

DESCRIPTION

This is the power source circuit to operate the navigation receiver assembly.

WIRING DIAGRAM

INSPECTION PROCEDURE

NOTICE:
Inspect the fuses for circuits related to this system before performing the following inspection procedure.

PROCEDURE

1. INSPECT NAVIGATION RECEIVER ASSEMBLY

(a) Disconnect the L40 navigation receiver assembly connector (w/ "Bluetooth" Audio System).

(b) Disconnect the L34 navigation receiver assembly connector (w/o "Bluetooth" Audio System).

(d) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

(e) Measure the voltage according to the value(s) in the table below.

Standard Voltage:

Text in Illustration

*4: w/ "Bluetooth" Audio System

*5: w/o "Bluetooth" Audio System

NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR

OK -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Problem Symptoms Table