Removal

EXTERIOR PANELS / TRIM: FRONT BUMPER: REMOVAL

1. REMOVE RADIATOR SUPPORT OPENING COVER

(a) Remove the 3 clips.





(b) Disengage the 2 claws and remove the radiator support opening cover.

2. REMOVE FRONT BUMPER ASSEMBLY

(a) Put protective tape around the front bumper assembly.









HINT
Use the same procedure for the RH side and LH side.

(b) Using a screwdriver, turn the pins 90 degrees and remove the pin hold clip.





HINT
Use the same procedure for the RH side and LH side.

(c) Remove the screw.





HINT
Use the same procedure for the RH side and LH side.

(d) Remove the 2 bolts and 4 screws.





(e) Using a clip remover, remove the 7 clips.

(f) Using a clip remover, remove the clip. (w/ Front Spoiler)





(g) Remove the 6 bolts and 2 screws, and front spoiler cover. (w/ Front Spoiler)

(h) Disengage the 3 claws and remove the front bumper assembly.





HINT
Use the same procedure for the RH side and LH side.

(i) Disconnect each connector.

(j) Disconnect the headlight cleaner hose and drain the washer fluid. (w/ Headlight Cleaner System)

HINT
Use a container to collect the washer fluid.

(k) Remove the front bumper assembly as shown in the illustration.