Reassembly

INTERIOR PANELS / TRIM: FRONT CONSOLE BOX: REASSEMBLY

1. INSTALL NO. 2 BOX SIDE PANEL (w/o Power Outlet Socket)

(a) Engage the 6 guides and 3 claws as shown in the illustration.

(b) Install the No. 2 box side panel with the screw.

2. INSTALL NO. 1 BOX SIDE PANEL (w/o Power Outlet Socket)

HINT
Use the same procedure for the RH side and LH side.

3. INSTALL CONSOLE COMPARTMENT DOOR CUSHION (w/o Power Outlet Socket)

(a) Install the 2 console compartment door cushions.

4. INSTALL OUTER CONSOLE COMPARTMENT DOOR (w/o Power Outlet Socket)

(a) Engage the 6 claws.

(b) Install the outer console compartment door with the 4 screws.

5. INSTALL CONSOLE COMPARTMENT DOOR HINGE SUB-ASSEMBLY (w/o Power Outlet Socket)

(a) Install the console compartment door hinge sub-assembly with the 2 screws.

6. INSTALL REAR CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY (w/o Power Outlet Socket)

(a) Install the rear console compartment door sub-assembly with the 2 screws.

7. INSTALL CONSOLE REAR END PANEL (w/o Power Outlet Socket)

(a) Engage the 10 claws to install the console rear end panel.

8. INSTALL CENTER POWER OUTLET SOCKET COVER (w/ Power Outlet Socket) Installation

9. INSTALL CENTER POWER OUTLET SOCKET ASSEMBLY (w/ Power Outlet Socket) Installation

10. INSTALL STEREO JACK ADAPTER ASSEMBLY (w/ Power Outlet Socket) Installation

11. INSTALL CIGARETTE LIGHTER WIRE ASSEMBLY (w/ Power Outlet Socket)

(a) Engage the clamp.

(b) Connect the 2 connectors to install the cigarette lighter wire assembly.

12. INSTALL CONSOLE COMPARTMENT DOOR CUSHION (w/ Power Outlet Socket)

(a) Install the 2 console compartment door cushions.

13. INSTALL NO. 2 BOX SIDE PANEL (w/ Power Outlet Socket)

(a) Engage the 9 claws and guide as shown in the illustration.

(b) Install the No. 2 box side panel with the 2 screws.

14. INSTALL NO. 1 BOX SIDE PANEL (w/ Power Outlet Socket)

HINT
Use the same procedure for the RH side and LH side.

15. INSTALL CONSOLE COMPARTMENT DOOR CUSHION (w/ Power Outlet Socket)

(a) Install a new console compartment door cushion.

(b) Engage the 4 claws to install the inner console compartment door.

16. INSTALL NO. 2 CONSOLE COMPARTMENT DOOR INSERT (w/ Power Outlet Socket)

(a) Engage the 3 claws and 7 guides to install the No. 2 console compartment door insert as shown in the illustration.

17. INSTALL NO. 1 CONSOLE COMPARTMENT DOOR INSERT (w/ Power Outlet Socket)

HINT
Use the same procedure for the RH side and LH side.

18. INSTALL REAR CONSOLE COMPARTMENT DOOR BOX COVER (w/ Power Outlet Socket)

(a) Engage the 2 claws and 5 guides to install the rear console compartment door box cover as shown in the illustration.

(b) Temporarily install the outer console compartment door with the 4 screws.

19. INSTALL CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY (w/ Power Outlet Socket)

(a) Temporarily install the console compartment door sub-assembly.

(b) Push in the box door hinge shafts by hand as far as possible.

HINT
* The illustration is for the LH side.
* Use the same procedure for the RH side and LH side.
(c) Using pliers, push in the box door hinge shafts completely and install the console compartment door sub-assembly.

HINT
* The illustration is for the LH side.
* Use the same procedure for the RH side and LH side.
20. INSTALL CONSOLE REAR END PANEL (w/ Power Outlet Socket)

(a) Engage the 10 claws to install the console rear end panel.

21. INSTALL CONSOLE BOX POCKET (w/ Power Outlet Socket)

(a) Engage the 2 claws and install the console box pocket as shown in the illustration.