Reassembly
INTERIOR PANELS / TRIM: UPPER INSTRUMENT PANEL: REASSEMBLY
1. INSTALL NO. 5 INSTRUMENT PANEL CUSHION
(a) Using hot-melt glue and install a new No. 5 instrument panel cushion as shown in the illustration.
2. INSTALL NO. 4 INSTRUMENT PANEL CUSHION
(a) Using hot-melt glue and install a new No. 4 instrument panel cushion as shown in the illustration.
3. INSTALL NO. 2 INSTRUMENT PANEL CUSHION
(a) Using hot-melt glue and install a new No. 2 instrument panel cushion as shown in the illustration.
4. INSTALL INSTRUMENT PANEL CUSHION
(a) Align the marking lines on the upper instrument panel with the ends of the instrument panel cushion and install a new instrument panel cushion as shown in the illustration.
5. INSTALL NO. 1 INSTRUMENT PANEL CUSHION
(a) Align the marking lines on the upper instrument panel with the ends of the No. 1 instrument panel cushion and install a new No. 1 instrument panel cushion as shown in the illustration.
6. INSTALL FRONT PASSENGER SIDE AIRBAG ASSEMBLY Installation
7. INSTALL METER HOOD SPACER
(a) Install the meter hood spacer with the 2 screws [C].
8. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY
(a) Install the center instrument panel register assembly with the 3 screws [C].
9. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
(a) Install the instrument cluster finish panel assembly with the 5 screws [C].
10. INSTALL NO. 5 INSTRUMENT PANEL WIRE
(a) Engage the 2 clamps to install the No. 5 instrument panel wire.
11. INSTALL NO. 2 INSTRUMENT PANEL WIRE
(a) Engage each clamp and 2 claws.
(b) Connect the connector to install the No. 2 instrument panel wire.
12. INSTALL AUTOMATIC LIGHT CONTROL SENSOR Installation
13. INSTALL NAVIGATION ANTENNA ASSEMBLY (w/ Navigation System) Installation
14. INSTALL PLASMACLUSTER WITH BRACKET (w/ Plasmacluster) Installation
15. INSTALL NO. 2 HEATER TO REGISTER DUCT
(a) Install the No. 2 heater to register duct with the 3 screws [C].
16. INSTALL NO. 3 HEATER TO REGISTER DUCT
(a) Install the No. 3 heater to register duct with the 3 screws [C].
