Removal

SEAT: LUMBAR SUPPORT ADJUSTER ASSEMBLY: REMOVAL

1. REMOVE REAR NO. 2 FLOOR BOARD (for Separate Seat Type) Removal

2. REMOVE REAR DECK FLOOR BOX Removal

3. REMOVE REAR NO. 3 FLOOR BOARD Removal

4. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Diagnosis System.

5. REMOVE FRONT SEAT HEADREST ASSEMBLY Removal

6. REMOVE OUTER SEAT TRACK COVER Removal

7. REMOVE INNER SEAT TRACK COVER Removal

8. REMOVE FRONT SEAT ASSEMBLY Removal

9. REMOVE RECLINING ADJUSTER RELEASE HANDLE Disassembly

10. REMOVE VERTICAL ADJUSTING HANDLE Disassembly

11. REMOVE FRONT SEAT CUSHION SHIELD ASSEMBLY Disassembly

12. REMOVE FRONT SEAT INNER BELT ASSEMBLY Removal

13. REMOVE FRONT SEAT CUSHION INNER SHIELD Disassembly

14. REMOVE FRONT SEAT CUSHION COVER WITH PAD Disassembly

15. REMOVE FRONT SEATBACK COVER WITH PAD Disassembly

16. REMOVE RECLINING ADJUSTER INSIDE COVER LH Disassembly

17. REMOVE RECLINING ADJUSTER INSIDE COVER RH Disassembly

18. REMOVE FRONT SEAT LOWER CUSHION SHIELD LH Disassembly

19. REMOVE FRONT SEAT LOWER CUSHION SHIELD RH Disassembly

20. REMOVE NO. 2 FRONT SEAT CUSHION PROTECTOR Disassembly

21. REMOVE NO. 1 FRONT SEAT CUSHION PROTECTOR Disassembly

22. REMOVE FRONT SEAT WIRE Disassembly

23. REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY

(a) Remove the 4 bolts and separate type front seatback assembly.