Removal

HYBRID / BATTERY CONTROL: BATTERY BLOWER: REMOVAL

1. REMOVE REAR SEAT CUSHION ASSEMBLY Removal

2. REMOVE REAR NO. 1 FLOOR BOARD SUB-ASSEMBLY Removal

3. REMOVE REAR NO. 2 FLOOR BOARD SUB-ASSEMBLY Removal

4. REMOVE REAR NO. 1 FLOOR BOARD Removal

5. REMOVE REAR FLOOR BOARD SPACER Removal

6. REMOVE NO. 1 HYBRID BATTERY EXHAUST DUCT Removal

7. REMOVE REAR DOOR SCUFF PLATE RH

HINT
Use the same procedure described for the LH side Removal.

8. REMOVE REAR SIDE SEAT BACK ASSEMBLY RH Removal

9. REMOVE NO. 1 HYBRID BATTERY INTAKE DUCT Removal

10. REMOVE BATTERY COOLING BLOWER ASSEMBLY

NOTICE:
* Be sure not to touch the fan part of the battery cooling blower assemblies.
* Do not lift the battery cooling blower assemblies using the wire harness.
(a) Disconnect the 3 wire harness clamps.

(b) Disconnect the battery cooling blower assembly connector and clamp.