Installation

CRUISE CONTROL: MILLIMETER WAVE RADAR SENSOR: INSTALLATION

1. INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY

(a) Tighten the 5 bolts on the millimeter wave radar sensor assembly.





Torque : 6.2 Nm (63 kgf-cm, 55 in-lbf)

HINT
Tighten the bolts in the order indicated in the illustration.

(b) Connect the connector.

2. INSTALL FRONT BUMPER ASSEMBLY Installation

3. ADD WASHER FLUID (w/ Headlight Cleaner System) Installation

4. PREPARE VEHICLE FOR FOG LIGHT AIMING ADJUSTMENT Adjustments

5. PREPARE FOR FOG LIGHT AIMING Adjustments

6. INSPECT FOG LIGHT AIMING Adjustments

7. ADJUST FOG LIGHT AIMING Adjustments

8. ADJUST MILLIMETER WAVE RADAR SENSOR ASSEMBLY Adjustments

9. INSTALL RADIATOR SUPPORT OPENING COVER Installation