Power Steering System

POWER STEERING: POWER STEERING SYSTEM: C1581/26: Assist Map Number Un-Writing
C1581/26 - Assist Map Number Un-Writing

DESCRIPTION

The power steering ECU outputs this DTC when it determines that the assist map is not written in the ECU.

HINT
The assist map data is written in the power steering ECU to control assisting power.

The assist map has 3 types. Select an assist map according to the vehicle country information that is recorded in the ECU.





INSPECTION PROCEDURE

PROCEDURE

1. PERFORM ASSIST MAP WRITING

(a) Turn the ignition switch ON.

(b) Connect the Techstream to the DLC3.

HINT
At this time, check that the P/S warning light is illuminated.

(1) Select signal check, and change to test mode.

(c) Wait for 3 seconds.

NEXT -- Continue to next step.

2. CHECK P/S WARNING LIGHT

(a) Check the P/S warning light.

Result:





HINT
If the P/S warning light blinks at 0.25 second intervals, the assist map adjustment has completed normally.

B -- END
A -- Continue to next step.

3. CHECK DTC

(a) Check for DTC.

Result:





HINT
If DTC C1581/26 is output, turn the ignition switch off. Enter test mode again. If the DTC is output 3 times in a row, replace the power steering ECU.

C -- PERFORM ASSIST MAP WRITING

B -- REFER TO DTC

A -- REPLACE POWER STEERING ECU