DTC 58-10

NAVIGATION: NAVIGATION SYSTEM (w/ CD Player): 58-10,80-10: Gyro Error
80-10 - Gyro Error

DESCRIPTION





INSPECTION PROCEDURE

HINT
After the inspection is completed, clear the DTCs Navigation System (w/ CD Player).

PROCEDURE

1. CHECK VEHICLE SENSOR (NAVIGATION CHECK MODE)

(a) Enter the "Navigation Check" mode and select "Vehicle Sensors" Operation Check.





(b) Check the gyro voltage.

Standard Voltage:

0.1 to 4.5 V

NG -- REPLACE NAVIGATION RECEIVER ASSEMBLY Removal
OK -- Continue to next step.

2. CLEAR DTC

(a) Clear the DTCs Navigation System (w/ CD Player).

NEXT -- Continue to next step.

3. RECHECK DTC

(a) Recheck for DTCs and check if the same trouble occurs again.

HINT
If DTCs are output frequently, replace the navigation receiver assembly.

OK:

No DTC is output.

NG -- REPLACE NAVIGATION RECEIVER ASSEMBLY Removal

OK -- END