Audio and Visual System

AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM: 62-46,63-46: Scratched / Reversed Disc
63-46 - Scratched / Reversed Disc

DESCRIPTION





INSPECTION PROCEDURE

HINT
After the inspection is completed, clear the DTCs.

PROCEDURE

1. CHECK THAT CD IS INSERTED PROPERLY

(a) Check whether or not the CD is inserted upside down.

OK:

CD is properly inserted.

NG -- SET CD PROPERLY
OK -- Continue to next step.

2. DISC CLEANING

(a) Disc cleaning





(1) If dirt is on the disc surface, wipe it with a soft cloth from inside to outside in a radial direction.

NOTICE:
Do not use a conventional record cleaner or antistatic preservative.

NEXT -- Continue to next step.

3. CHECK DISC

(a) Check that the disc is not deformed or cracked.





OK:

No deformation or cracks on the disc.

NG -- DISC IS FAULTY
OK -- Continue to next step.

4. REPLACE DISC WITH ANOTHER AND RECHECK

(a) Replace the disc with another and recheck.

(1) Replace the disc with a normal one.

(2) Clear the DTC Reading and Clearing Diagnostic Trouble Codes.

(3) Recheck DTCs and check if the same trouble occurs again.

OK:

Malfunction disappears.

NG -- REPLACE RADIO RECEIVER ASSEMBLY

OK -- END