Rear View Monitor System

PARK ASSIST / MONITORING: REAR VIEW MONITOR SYSTEM: TERMINALS OF ECU

1. CHECK INNER REAR VIEW MIRROR ASSEMBLY





(a) Disconnect the P8 inner rear view mirror assembly connector.

(b) Measure the voltage and resistance according to the value(s) in the table below.





(c) If the result is not as specified, there may be a malfunction on the wire harness side.

(d) Reconnect the P8 inner rear view mirror assembly connector.

(e) Measure the voltage according to the value(s) in the table below.





(f) If the result is not as specified, the inner rear view mirror assembly may have a malfunction.

(g) Using an oscilloscope, check waveform 1.









(h) Using an oscilloscope, check waveform 2.