Installation

DOOR LOCK: ENTRY LOCK AND UNLOCK SWITCH (for Front): INSTALLATION

HINT
* Use the same procedure for the RH and LH sides.
* The procedures listed below are for the LH side.
* A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.
1. INSTALL FRONT DOOR OUTSIDE HANDLE ASSEMBLY LH

(a) Install the handle by pushing and sliding it in the direction indicated by the arrows in the illustration.





(b) Connect the connector.





2. INSTALL FRONT DOOR OUTSIDE HANDLE COVER LH (for Driver Side) Reassembly

3. INSTALL FRONT DOOR OUTSIDE HANDLE COVER RH (for Passenger Side) Reassembly

4. INSTALL FRONT DOOR SERVICE HOLE COVER LH Reassembly

5. INSTALL FRONT DOOR INSIDE HANDLE SUB-ASSEMBLY LH Reassembly

6. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH Reassembly

7. INSTALL FRONT UPPER ARMREST BASE PANEL LH Reassembly

8. INSTALL FRONT LOWER DOOR FRAME BRACKET GARNISH LH Reassembly