Smart Key System

DOOR LOCK: SMART KEY SYSTEM: CUSTOMIZE PARAMETERS

1. CUSTOMIZING FUNCTION WITH TECHSTREAM (REFERENCE)

HINT
The items in the table below can be customized.

NOTICE:
* When the customer requests a change in a function, first make sure that the function can be customized.
* Be sure to make a note of the current settings before customizing.
* When troubleshooting a function, first make sure that the function is set to the default setting.

(a) Connect the Techstream to the DLC3.

(b) Turn the engine switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Customize Setting.

(e) Select the setting by referring to the table below.

Smart Key / Access





Warning





HINT
*1: Waiting time to permit unlocking door after locking.

*2: Entry ignition available area.

*3: "FRONT" means front, and "ALL" means front and rear.

*4: Warn when key battery becomes weak.

2. KEY CANCEL

The key cancel operation disables the following functions:

* Entry unlock / lock function

* Key lock-in prevention function

* Warning function

(a) The operation procedures are as follows:

Precondition:

Engine switch off, driver side door closed and unlocked

(1) Unlock the doors once with the UNLOCK switch of the key.

(2) Open the driver door within 5 seconds.

(3) Unlock the doors twice with the UNLOCK switch of the key within 5 seconds.

(4) Perform close -> open twice for the driver door within 30 seconds.

(Driver door: Open condition -> Close -> Open -> Close -> Open)

(5) Unlock the driver side door twice with the UNLOCK switch of the key within 5 seconds.

(6) Perform close -> open once for the driver door within 30 seconds.

(Driver door: Open condition -> Close -> Open)

(7) Close the driver door within 5 seconds.

When key cancel is activated, the wireless door lock buzzer sounds twice.

To return to the original condition, perform the procedures again. When the original condition is returned, the wireless door lock buzzer sounds once.