Installation

MIRROR: OUTER REAR VIEW MIRROR: INSTALLATION

1. INSTALL OUTER MIRROR COVER LOWER LH (for TMC Made)





(a) Attach the 6 claws to install the mirror cover lower.

2. INSTALL OUTER MIRROR COVER LH





(a) Attach the 8 claws to install the mirror cover.

(b) Check that there is no gap between the cover and mirror body.

HINT
If there is a gap between the cover and body, noise will occur during driving.

3. INSTALL OUTER REAR VIEW MIRROR SUB-ASSEMBLY LH





(a) w/ Mirror Heater:

(1) Connect the 2 connectors.

(2) Attach the 4 claws to install the mirror.





(b) w/o Mirror Heater:

Attach the 4 claws to install the mirror.

4. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY LH





(a) Pass the connector labeled A and wire harness of the mirror through the wire harness hole.

(b) Temporarily install the mirror by inserting the bosses on the mirror into the holes on the vehicle and temporarily installing the 3 screws.

(c) Tighten the 3 screws in the sequence shown in the illustration to install the mirror.

Torque : 9.0 Nm (92 kgf-cm, 80 in-lbf)

(d) Connect the connector labeled A.

5. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH Reassembly

6. INSTALL FRONT UPPER ARMREST BASE PANEL LH Reassembly

7. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH LH Reassembly