Installation

BRAKE: REAR BRAKE: INSTALLATION

HINT
* Use the same procedure for the RH and LH sides.
* The procedures listed below are for the LH side.
1. INSTALL REAR DISC BRAKE CYLINDER ASSEMBLY LH

(a) Install the cylinder with the 2 bolts.





Torque : 27 Nm (270 kgf-cm, 20 ft-lbf)

2. CONNECT REAR FLEXIBLE HOSE LH

(a) Install a new gasket and connect the flexible hose with a new union bolt.





Torque : 30 Nm (310 kgf-cm, 22 ft-lbf)

HINT
Install the flexible hose lock securely in the lock hole in the cylinder.

3. REMOVE COWL TOP VENTILATOR LOUVER BRACKET LH Bleeding

4. BLEED BRAKE SYSTEM Bleeding

5. INSTALL COWL TOP VENTILATOR LOUVER BRACKET LH Bleeding

6. INSTALL REAR WHEEL

Torque : 103 Nm (1050 kgf-cm, 76 ft-lbf)