Road Test

CRUISE CONTROL: CRUISE CONTROL SYSTEM: ROAD TEST

1. INSPECT SET SWITCH

(a) Push the main switch ON.

(b) Drive at a desired speed (40 km/h (25 mph) or higher).

(c) Press the control switch to -/SET.

(d) After releasing the switch, check that the vehicle cruises at the desired speed.

2. INSPECT "+" SWITCH

(a) Push the main switch button ON.

(b) Drive at a desired speed (40 km/h (25 mph) or higher).

(c) Press the control switch to -/SET.

(d) Check that the vehicle speed increases while the control switch is pressed to +/RES, and that the vehicle cruises at the set speed when the switch is released.

(e) Momentarily press the control switch to +/RES and then immediately release it. Check that the vehicle speed increases by about 1.6 km/h (1 mph) (Tap-up function).

3. INSPECT "-" SWITCH

(a) Push the main switch button ON.

(b) Drive at a desired speed (40 km/h (25 mph) or higher).

(c) Press the control switch to -/SET.

(d) Check that the vehicle speed decreases while the control switch is pressed to -/SET, and the vehicle cruises at the set speed when the switch is released.

(e) Momentarily press the control switch to -/SET, and then immediately release it. Check that the vehicle speed decreases by about 1.6 km/h (1 mph) (Tap-down function).

4. INSPECT CANCEL SWITCH

(a) Push the main switch button ON.

(b) Drive at a desired speed (40 km/h (25 mph) or higher).

(d) When operating one of the following, check that the cruise control system is canceled.

* Depressing the brake pedal

* Pushing the cruise control main switch OFF

* Pulling the cruise control switch to CANCEL

* The shift lever is moved from D or 4 to N, 3, 2 or 1. (for 2GR-FE)

* The shift lever is moved from D or 3 to N, 2 or 1. (for 2AR-FE)

5. INSPECT RES (RESUME) SWITCH

(a) Push the main switch button ON.

(b) Drive at a desired speed (40 km/h (25 mph) or higher).

(d) When operating one of the following, check that the cruise control system is canceled.

* Depressing the brake pedal

* Pulling the cruise control switch to CANCEL

* The shift lever is moved from D or 4 to N, 3, 2 or 1. (for 2GR-FE)

* The shift lever is moved from D or 3 to N, 2 or 1. (for 2AR-FE)

(e) After the control switch is pressed to +/RES at a driving speed of more than 40 km/h (25 mph), check that the vehicle restores the speed before the cancellation.