Removal

2AR-FE ENGINE MECHANICAL: ENGINE UNIT: REMOVAL

1. REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE

(a) Remove the engine oil level dipstick.





(b) Remove the bolt and dipstick guide.

(c) Remove the O-ring from the dipstick guide.

2. REMOVE MANIFOLD STAY Removal

3. REMOVE NO. 2 MANIFOLD STAY Removal

4. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR Removal

5. REMOVE NO. 2 EXHAUST MANIFOLD HEAT INSULATOR Removal

6. REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY Removal

7. REMOVE COOLER COMPRESSOR ASSEMBLY Removal

8. REMOVE NO. 1 COMPRESSOR MOUNTING BRACKET

(a) Remove the 4 bolts and bracket.





9. REMOVE THROTTLE BODY ASSEMBLY Removal

10. REMOVE WATER BY-PASS HOSE

(a) Remove the No. 1 and No. 2 water by-pass hoses.





11. DISCONNECT WIRE HARNESS Removal

12. REMOVE VACUUM SWITCHING VALVE ASSEMBLY (for ACIS) Removal

13. DISCONNECT NO. 2 VENTILATION HOSE Removal

14. REMOVE INTAKE MANIFOLD Removal

15. REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY Removal

16. REMOVE ENGINE COOLANT TEMPERATURE SENSOR Removal

17. REMOVE FUEL DELIVERY PIPE SUB-ASSEMBLY Removal

18. REMOVE IGNITION COIL ASSEMBLY Removal