Removal

LIGHTING: LICENSE PLATE LIGHT ASSEMBLY (w/ Tire Carrier): REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE BACK DOOR CENTER GARNISH Disassembly

3. REMOVE BACK DOOR SIDE GARNISH LH Disassembly

4. REMOVE BACK DOOR SIDE GARNISH RH Disassembly

5. REMOVE BACK DOOR TRIM BOARD Disassembly

6. REMOVE BACK DOOR LOWER OUTSIDE GARNISH SUB-ASSEMBLY LH

7. REMOVE LICENSE PLATE LIGHT ASSEMBLY

(a) Disconnect the connector.





(b) Using a screwdriver, remove the light as shown in the illustration.