Removal

LIGHTING: VANITY LIGHT: REMOVAL

HINT
* Use the same procedures for the RH and LH sides.
* The procedures listed below are for the LH side.
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE VANITY LIGHT ASSEMBLY





(a) Using a screwdriver, pry out the vanity light.

HINT
Tape the screwdriver tip before use.





(b) Detach the 2 claws and vanity light.

3. REMOVE VANITY LIGHT BULB





(a) Remove the light bulb from the vanity light.