Installation

TIRE AND WHEEL: TIRE PRESSURE WARNING RECEIVER (w/ Antenna): INSTALLATION

1. INSTALL TIRE PRESSURE WARNING ANTENNA AND RECEIVER

(a) Install the receiver with the bolt.





Torque : 7.5 Nm (76 kgf-cm, 66 in-lbf)

(b) Connect the connector.

2. INSTALL INNER ROOF SIDE GARNISH ASSEMBLY RH Installation

3. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH (w/o Rear No. 2 Seat) Installation

4. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH (w/ Rear No. 2 Seat) Installation

5. INSTALL TETHER ANCHOR BRACKET SUB-ASSEMBLY (w/o Rear No. 2 Seat) Installation

6. INSTALL RECLINING REMOTE CONTROL LEVER BEZEL RH (w/o Rear No. 2 Seat) Installation

7. INSTALL REAR DECK TRIM COVER RH (w/ Rear No. 2 Seat) Installation

8. INSTALL REAR FLOOR FINISH PLATE Installation

9. INSTALL REAR FLOOR NO. 1 MAT SUPPORT SIDE PLATE Installation

10. INSTALL REAR FLOOR NO. 2 BOARD

11. INSTALL REAR FLOOR NO. 3 BOARD

12. INSTALL REAR NO. 2 SEAT ASSEMBLY LH (w/ Rear No. 2 Seat) Installation

13. INSTALL REAR NO. 2 SEAT ASSEMBLY RH (w/ Rear No. 2 Seat) Installation

14. INSTALL NO. 2 SEAT LEG COVER LH (w/ Rear No. 2 Seat) Installation

15. INSTALL NO. 2 SEAT LEG COVER RH (w/ Rear No. 2 Seat) Installation

16. INSTALL NO. 2 SEAT HINGE COVER LH (w/ Rear No. 2 Seat) Installation

17. INSTALL NO. 2 SEAT HINGE COVER RH (w/ Rear No. 2 Seat) Installation

18. INSTALL DECK BOARD ASSEMBLY (w/o Rear No. 2 Seat)

19. INSTALL REAR FLOOR NO. 1 BOARD (w/o Rear No. 2 Seat)

20. INSTALL TONNEAU COVER ASSEMBLY (w/o Rear No. 2 Seat)

21. INSTALL PACKAGE TRAY TRIM POCKET SUB-ASSEMBLY (w/o Rear No. 2 Seat)

22. INSTALL REAR DOOR SCUFF PLATE RH Installation

23. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

24. REGISTER TRANSMITTER ID Programming and Relearning

25. INSPECT TIRE PRESSURE WARNING SYSTEM