Removal

SUPPLEMENTAL RESTRAINT SYSTEM: SEAT POSITION SENSOR: REMOVAL

CAUTION:
Be sure to read the precautionary notices concerning the SRS airbag system before servicing it Service Precautions.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE FRONT SEAT ASSEMBLY (for Manual Seat) Removal

3. REMOVE FRONT SEAT ASSEMBLY (for Power Seat) Removal

4. REMOVE SEAT POSITION AIRBAG SENSOR

(a) Remove the seat slide position sensor protector from the seat position sensor.





(b) Using a T30 "torx" socket, remove the "torx" screw and seat position sensor.

(c) Disconnect the connector.